(07) 4566 9984 info@awpe.com.au
9 Railway StreetNORTH BRANCH QLD 4356

The Top 5 Common Plumbing Problems Every Homeowner Should Be Aware Of

Water plays a pivotal role in our daily lives, from the morning shower to the evening dishes. However, the intricate network of pipes and faucets ensuring this seamless access can occasionally falter, leading to inconveniences at best and catastrophes at worst. As homeowners, understanding these plumbing anomalies not only empowers us to address minor issues promptly but also aids in averting potential disasters. While some plumbing problems are mere nuisances, others can escalate into significant expenses if left unchecked. This blog post delves into the top 10 common plumbing problems you’ll likely encounter, offering insights on their causes, preventive measures, and when to ring the alarm bell for professional help. Stay informed and ensure the smooth operation of your home’s vital waterways!

Common Plumbing Problems

Dripping Faucets

Though seemingly minor, a dripping faucet can be an irksome household problem. At the root of this persistent dripping is typically a worn-out washer or o-ring, which fails to form a watertight seal. Over time, these small components can become damaged or dislodged, allowing water to leak through. In some cases, an improperly sized washer or problems with the faucet’s valve seat can also be culprits.

A single drip may appear inconsequential, but the wasted water is staggering when summed over days, weeks, and months. A leaky faucet dripping at the rate of one drip per second can waste over 3,000 gallons of water in a year. That’s the equivalent of over 180 showers! This not only has a tangible environmental impact, reducing available freshwater resources, but it also translates to an unnecessary hike in your water bill.

Basic Troubleshooting Tips:

  1. Turn Off the Water Supply: Before attempting any repairs, ensure the water supply to the faucet is turned off.
  2. Check the Washer and O-ring: Unscrew and dismantle the faucet handle to inspect the washer and o-ring inside for any wear or damage.
  3. Replace If Necessary: If the washer or o-ring looks worn out, replace it with a new one that matches the size and type.
  4. Inspect the Valve Seat: A corroded valve seat could cause dripping. Cleaning it can often solve the issue.
  5. Reassemble and Test: After making the necessary adjustments or replacements, reassemble the faucet and turn on the water supply. Check to see if the drip has been resolved.
  6. Seek Professional Help: If the problem persists or you’re unsure about the repair, it’s always a good idea to consult a professional plumber in Burleigh Heads.

A proactive approach to fixing a dripping faucet saves water and money and spares you the annoyance of that constant dripping sound.

Slow Draining Sink

Slow-draining sinks are a frequent grievance in many households, often disrupting daily routines. Several factors can lead to this issue:

  1. Hair and Soap Buildup: Especially common in bathroom sinks and showers, hair strands entwined with soap residue can form a mesh-like blockage, reducing drainage speed.
  2. Food Debris: In kitchen sinks without garbage disposals, bits of food can become lodged in the drain, causing slowdowns.
  3. Grease and Fat: Over time, poured grease or fats from cooking can solidify inside pipes, narrowing the passageway.
  4. Foreign Objects: Occasionally, small toys, jewellery, or other objects can accidentally fall into the drain and obstruct water flow.
  5. Pipe Buildup: Mineral buildup, sediment, and scale can accumulate inside pipes, especially in areas with hard water, leading to reduced flow.
  6. Structural Issues: In rare instances, a slow drain could be due to improperly installed or damaged pipes.

DIY Solutions:

  1. Natural Cleaners: Pour a mixture of equal parts white vinegar and baking soda down the drain. Let it sit for 30 minutes to an hour, then rinse with boiling water. This can dissolve minor blockages and buildup.
  2. Plunger: Using a plunger can help dislodge obstructions, especially if they are near the surface.
  3. Check the P-Trap: Often, blockages can occur in the U-shaped pipe (P-trap) beneath the sink. You can unscrew and clean out this section after placing a bucket underneath to catch water.
  4. Drain Snake or Auger: This long, flexible tool can be inserted into the drain to reach and break up deeper blockages.
  5. Avoid Chemical Drain Cleaners: While they might seem effective, chemical drain cleaners can corrode pipes and harm the environment. Opt for enzyme-based alternatives if necessary.

When to Call a Professional:

If you’ve tried multiple methods and the sink still drains slowly, it might be time to seek professional help. A plumber can provide a more thorough diagnosis, potentially identifying issues deeper in your home’s plumbing system. Additionally, a professional assessment is crucial to prevent further complications if you suspect structural issues or if the problem is recurring despite interventions.

Being proactive about sink maintenance, like using drain strainers and avoiding dumping grease, can …

Read More →

Is An Electrical Switchboard Upgrade Right For You?

What does an electrical switchboard do? It is a key component of all electrical circuits because this controls almost every electrical flow in the entire building. It distributes power from a single electrical source to another by either letting the power flow continuously from the overloaded circuit or shutting off the supply to reduce the overload. The switchboards also regulate and secure the electrical energy so that power spikes and cuts do not occur.

Why Upgrade Your Switchboard

There are two ways that the electrical switchboard upgrade can help you. One way is that it will prevent overloads and blackouts by reducing the amount of electricity that flows into and out of the electrical system. When the overload occurs, the old fuse boards will often melt and break off the supply. The new fuse boards will withstand high levels of electricity and work just as effectively as the old ones.

Second, the electrical switchboard upgrade will allow you to install more efficient wiring. With the older fuse boards, the electrical current would flow continuously between circuits. As the current increased or decreased, the current through the wires would also change. This means that there would be fluctuations in the voltage or the power levels in the system. A level 2 electrician should be used to handle these situations if they occur because they can be very dangerous.

Third, electrical switchboard upgrades can improve the overall efficiency of your electrical wiring. Old fuse bulbs were bulky and did not offer much in the way of power. This means that you were relying on a large amount of electricity to run things around the home. When the power went out, so did the lights. This means that you were relying on electricity for lighting and heating and you didn’t have any backup power sources in place.

Hiring the Right Electrician for the Job

A level 2 electrician is someone trained and capable of working on electrical switchboards. These technicians are specially trained to detect problems with fuses and circuit breakers and can also repair damaged fuses and circuit breakers. Because their job involves monitoring the electrical power, they can make sure that everything in the building is running smoothly.

With a level 2 electrician handling the electrical switchboard upgrade, you will notice that the electricity use will decrease dramatically. If you have ever left a light on when the power went out, you will know that it was an enormous pain to have to wait until the electricity came back on. The old fuse boards were also expensive and very bulky. They took up quite a bit of room and were very difficult to access. They also required special wiring and they were very expensive to replace.

If you want to take advantage of new electrical systems, you have to make sure that you hire a good electrical systems installer. You need someone who understands electrical systems and how things work. The best installers are ones who are familiar with high capacity fuse packages, circuit breaker panels, appliance safety and electrical switchboard upgrade packages. These technicians can help you evaluate your electrical systems. They can give you information about what you need to change or how you can update your existing systems and make them more energy-efficient.

Electrical switchboards are not one size fits all. You must get a package that will fit your needs and budget. New electrical systems are expensive and you need to understand what your cost will be to operate them as well as what your cost will be if you install an older fuse board. Newer fuse packages are more efficient and provide more power. Fuses also come with a safety feature that will ensure that you do not burn yourself when the circuit breaker or your appliances short out.…

Read More →

Electrical Contractors For All Your Needs

When it comes to electrical repairs, there are several types of electrical services that a customer may need. Regardless of whether your home has central heat or air conditioning, or if you have an older home with electrical problems, electrical repair is something that should only be approached by a professional. 

For assistance with your home electrical wiring, make sure to contact a business offering residential electrical services. Hiring a professional electrical service provider to fix your system will ensure that your home is safe and secure and that you receive the highest quality service. 

Common Services

When it comes to residential electrical services, three types of services are available: installation, repair, and maintenance. With installation, an electrician designs the electrical wiring system in your home. 

The electrician makes certain all of the necessary connections between different parts of the wiring system are OK and tests the system for efficiency and durability. 

Once the system is tested and deemed satisfactory for installation, the plan is then submitted to the utility company for approval. Electrical wiring is installed by licensed professionals in a timely and safe manner and an experienced electrician will know the best ways to install your system.

Electrical services that fall into the maintenance category involve routine maintenance and safety measures. If your home has been built before 2021 and is still in fairly good shape, your electrician should be able to make some basic repairs to the wiring. 

Some common problems include poor wiring placement, insulation failure, and leaking and some problems may require professional intervention. 

If your electrician cannot repair the wiring in your home, he/she can recommend to you a licensed contractor who can.

In addition to routine maintenance, residential electrical services also include emergency repair. During times when the power is out, residential electricians are equipped with the tools and knowledge necessary to repair appliances and structure. When there are leaks, broken cables, and overloaded circuits, it’s important to call in a professional to make sure the problem is taken care of as soon as possible. Because electricity can kill in a very short time, getting the problem fixed as soon as possible will prevent damage to your property. 

Hiring An Electrician

When hiring residential electricians, make sure the company you choose has the skills, knowledge, and equipment to perform the types of services you need. Having an electrician with experience is extremely important, especially if you have small children or pets in the home and there are many benefits to hiring electrical contractors for all of your electrical needs. 

Hiring an electrician is good to make sure that your home is safe and properly maintained. If your current technician doesn’t have the experience or skills required for your electrical needs, its important to find one that has the level of expertise needed. The technicians usually have training in basic maintenance, but they typically spend additional time getting to know the electrical wiring in your home before getting started.

If you need any electrical repairs, it’s important to hire professionals who use high-quality products and have the knowledge and skill required for the job. It’s important to choose a professional that uses only approved materials in their electrical services. All of the above and more applies to a team like Jolt Electrical.

It’s also a good idea to choose an electrician who offers surge protection. Most modern electrical equipment comes with built-in surge protection, but there are still some problems that can occur when a surge occurs and hits an appliance.

Some of the most common electrical repairs include lamp failure, power surges, overloaded circuits, strip overloads, and wiring issues. Many times, these types of issues can be fixed without calling the company that provided the original installation. 

Some electrical professionals are also able to perform other types of services including panel upgrades and other types of design and installation work. If you’re not sure whether an upgrade would be beneficial in your situation, most electricians can perform a free panel upgrade inspection. 

This type of inspection is a great way to see how well an electrician does in their jobs and what types of services they provide but at the end of the day you want to make sure they can efficiently carry out the job you need doing.…

Read More →